12 Products

EPDM Rubber Roofing

Sort
Showing products 1 to 12 of 12
Firestone EPDM Rubbercover Membrane  1.14mm Thick (Cut to size)

Cut to size (£8.23 per m2)

Please add m2 amount to cart

Example: 5m x 4m sheet = 20m2 (add m2 to cart)

Firestone 2013 Bonding Adhesive 5Ltr

For bonding membrane to wood stone, felt, concrete, steel etc.
Coverage: 3m² per litre
 

Firestone 2012 Bonding Adhesive 20Ltr

For bonding membrane to wood stone, felt, concrete, steel etc.
Coverage: 3m² per litre
 

Firestone Water Based Adhesive  5Ltr WBA-3781 EPDM to Timber

For bonding membrane to OSB, timber, plywood or suitable insulation panels.
(coverage 5m² per litre)

Firestone Water Based Adhesive 19 Ltr WBA-3781 EPDM to Timber

For bonding membrane to OSB, timber, plywood or suitable insulation panels.
(coverage 5m² per litre)

Firestone 3″ Splice/Seam Tape (Cut per Metre)

Used as a joint tape between sheets of EPDM.
(Use with primer + quickscrubber)
 

Firestone Self Adhesive Flashing 18" (per metre)

Cured EPDM used with primer to flash rooflight upstands, gutters, valleys etc.

Rubberseal Penny Roller

Use to press flashing tapes into internal corners

Rubberseal Styrene Gutter/Drip Trim Black 2.5m x 60mm (Black)

2 part trim to take water into a gutter

Rubberseal Styrene Upstand Trim 2.5m x 90mm (Black)

Used on edges to retain water on the roof

Rubberseal External Upstand Corner

Used to finish the corner of a roof where two trims meet on an external corner

Rubberseal Styrene Int Upstand Corner In Black

Used to finish the corner of a roof where two trims meet on an internal corner.